| Autor: |
Changshuai Shi, Xiaofeng Wan, Xiaohua Zhu, Kailin Chen |
| Jazyk: |
angličtina |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Petroleum, Vol 8, Iss 3, Pp 403-413 (2022) |
| Druh dokumentu: |
article |
| ISSN: |
2405-6561 |
| DOI: |
10.1016/j.petlm.2021.04.008 |
| Popis: |
Shale gas production has become the main driver of global gas production growth. Deep shale gas is difficult to extract, which puts forward higher requirements for drilling speed increase. The downhole power drilling tools are mainly screw drilling tools. Conventional screw drill tool stator bushing has poor heat dissipation, which is prone to thermal hysteresis failure, shortening drilling tool life, and is not suitable for high temperature and high pressure environment of deep shale gas wells. Equal wall thickness screw drilling tools and hydrogenated nitrile rubber have better high temperature resistance. Therefore, based on the thermal aging experiment and constitutive model of the rubber changes the displacement of the inner cavity of the stator bushing and the difference between the front and the back is up to 21.6%. The increase of the interference and eccentricity between rotor and motor leads to the increase of the maximum von Mises stress of the stator bushing and the thermal hysteresis temperature. The influence of the interference is greater than the influence of the eccentricity so that the interference should be given priority in the design. This paper provides a theoretical reference for the design and optimization of equal wall thickness bushing of positive displacement motor. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
