Direct power control using space vector modulation strategy control for wind energy conversion system using three-phase matrix converter
| Autor: | A. Boukadoum, A. Bouguerne, T. Bahi |
|---|---|
| Jazyk: | English<br />Russian<br />Ukrainian |
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | Electrical engineering & Electromechanics, Iss 3, Pp 40-46 (2023) |
| Druh dokumentu: | article |
| ISSN: | 2074-272X 2309-3404 |
| DOI: | 10.20998/2074-272X.2023.3.06 |
| Popis: | Introduction. Wind energy conversion system is getting a lot of attention since, they are provide several advantages, such as cost competitive, environmentally clean, and safe renewable power source as compared with the fossil fuel and nuclear power generation. A special type of induction generator, called a doubly fed induction generator is used extensively for high-power wind energy conversion system. They are used more and more in wind turbine applications due to the advantages of variable speed operation range and its four quadrants active and reactive power capabilities, high energy efficiency, and the improved power quality. Wind energy conversion systems require a good choice of power electronic converters for the improvement of the quality of the electrical energy produced at the generator terminals. There are several power electronics converters that are the most popular such as the two stage back-back converter. Because of the disadvantage of these converters to produce large harmonics distortions, we will choose using of three-phase matrix converter. Purpose. Work presents a direct power control using space vector modulation for a doubly fed induction generator based wind turbine. The main strategy control is to control the active and reactive powers and reduce the harmonic distortion of stator currents for variable wind speed. The novelty of the work is to use a doubly fed induction machine and a three pulses matrix converter to reduce the low cost, volume and the elimination of the grid side converter controller are very attractive aspects of the proposed topology compared to the conventional methods such as back-to-back converters. Simulation results are carried out on a 1.5 MW of wind energy conversion system connected to the grid. The efficiency of the proposed system has been simulated and high results performances are evaluated to show the validity of the proposed control strategy to decouple and control the active and reactive power for different values of wind speed. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|