Experimental Study Convection Heat Transfer Inside the Triangular Duct Filled with Porous Media
| Autor: | Sabah Mahdi, Suhad Rasheed |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | Engineering and Technology Journal, Vol 41, Iss 1, Pp 203-217 (2023) |
| Druh dokumentu: | article |
| ISSN: | 1681-6900 2412-0758 |
| DOI: | 10.30684/etj.2022.136144.1297 |
| Popis: | Convection heat transfer inside an empty triangular channel when filled with porous media heated proportionally with a constant heat flux (1300 W/m²) at the Reynolds number range (3165- 10910) with packed beds has been studied. The present work investigates porous media experimentally. The packed duct has a length (1 m) and (0.1 m) hydraulic diameter packed with porous material made from spherical glass particles of two different diameters (5 mm, and 10 mm). The value of porosity for the channel is (0.468,0.616 and), respectively. This research studies the effect of changing the Reynolds number and porosity on the enhanced heat transfer coefficient and local Nusselt number. The results indicated that using a porous structure enhanced the convection heat transfer coefficient significantly by (90.2%) and (92.1%) at porosity (0.616, 0.468), respectively, when compared with an empty duct. The results also revealed that the local Nusselt number decreased when the flow's axial position increased with increasing air velocity. The pressure on both ends of the test section increased as the air velocity rose and reduced as the size of the glass spheres increased. Therefore, the drag coefficient decreases as the modified Reynolds number increases with the diameter of glass spheres. The current research was compared with previous research, and the results were satisfactory. Correlational relationships were reached between the Nusselt number and the Reynolds number. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|