Valorisation of Pine Cone as an Efficient Biosorbent for the Removal of Pb(II), Cd(II), Cu(II), and Cr(VI)
| Autor: | Marwa Ben Amar, Khaled Walha, Victoria Salvadó |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Adsorption Science & Technology, Vol 2021 (2021) |
| Druh dokumentu: | article |
| ISSN: | 0263-6174 2048-4038 |
| DOI: | 10.1155/2021/6678530 |
| Popis: | Valorisation of pine cone as an efficient, low-cost, and eco-friendly biosorbent for the removal of heavy metals from aqueous solutions is evaluated. The morphology and surface chemistry of the biosorbent are characterized by scanning electron microscopy, energy-dispersive elemental analysis, and Fourier transform infrared spectroscopy, revealing the presence of carboxylic and alcoholic functional groups that interact with metal ions. The effect of the contact time, pH, amount of adsorbent, and initial metal concentration in the adsorption is studied, resulting in removal percentages for Cd(II), Cu(II), Pb(II), and Cr(VI) (metal concentration of 5 mg L-1) of 82.24%, 93.71%, 94.67%, and 88.8%, respectively (pH=5.4, 2 g L-1 of adsorbent), except for Cr(VI) (pH=2, 10 g L-1). The equilibrium data of Pb(II) and Cd(II) were found to follow the Langmuir-Freundlich model, with maximum adsorption capacities of 100.01 and 78.73 mg g-1, respectively, whereas Cu(II) followed the Langmuir model with 33.55 mg g-1. Cr(VI) adsorption data also fitted the Langmuir model, and the maximum adsorption capacity was 57.36 mg g-1. Adsorption data was obtained at pH 5.4 for divalent metal ions and at pH 2 for Cr(VI) and in a range of metal concentrations ranging from 1 to 500 mg L-1 at 298.2 K. The presence of the three metal ions in the solution does not affect the percentage of the target metal ion adsorbed, proving the absence of competition between them and showing the pine cone to be an efficient adsorbent to treat multimetal effluents allowing water reuse. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|