| Popis: |
In recent years, nano-modified asphalt has gained significant attraction from researchers in the design of asphalt pavement fields. The recently discovered Titanium dioxide nanoparticles (TiO2) are among the most exciting and promising nanomaterials. This study examines the effect of 1, 3, 5, and 7% of nano-TiO2 by weight of asphalt on some of its rheological and hardened properties. The experimental study included physical and rheological properties. The asphalt penetration, softening point, ductility, and rotational viscometer tests indicate that 5% nano-TiO2 is the ideal amount to be added to bitumen as a modifier. The study of the rotating viscosity test showed that the addition of nano-TiO2 helped to increase viscosity and lessen bituminous sensitivity. Rutting factor in terms of G*/sin δ indicated the addition of 3 to 7% of nano-TiO2 increased the rutting resistance of asphalt against higher temperatures and promoted performance grade by about one grade at 3% and two grades at a range of 5–7% this suggests that nano-TiO2 increased the stiffness of the asphalt and leading to enhance the rutting performance of asphalt. While fatigue parameter, G*.sin δ shows that as nanocontent increases, higher stiffness at 5 and 7% of TiO2 content leads to an increase in complex modulus and a decrease in fatigue parameter. Higher creep stiffness and higher m-values were noted at low temperatures as nano increases in asphalt binder, increasing stiffness and decreasing the m-value at −6 and 12°C. As a result, using 5% nano-TiO2 will improve asphalt’s physical properties and enhance asphalt anit-rutting and fatigue resistance. |
