Simulation of cement-ash stone for wells

Autor: V. M. Orlovskyi, V. S. Biletskyi, A. V. Melezhyk
Jazyk: English<br />Russian<br />Ukrainian
Rok vydání: 2021
Předmět:
Zdroj: Мінеральні ресурси України, Iss 4, Pp 41-45 (2021)
Druh dokumentu: article
ISSN: 1682-721X
2707-8698
DOI: 10.31996/mru.2021.4.41-45
Popis: Purpose. The purpose of this work is to obtain a statistical mathematical model of cement-ash stone with the response function – the strength of the stone. In particular, the task is to establish the effect on the strength of cement stone additives in the form of ash-removal of thermal power plants (pozzolanic additive). Methodology. A rotatable central composition plan of the experiment was used to obtain a statistical model. The results were processed using the method of computer mathematical modeling using the system STATGRAPHICS Plus for Windows. Originality. It is established that the hypersurface G (X₁, X₂) has an extremum point, which allows to optimize the composition of the cement mixture by factors X₁, X₂. Practical value. The results obtained in this work make it possible to predict the strength characteristics of the stone on the basis of cement-ash composition. Finding. The statistical mathematical model of cement-ash stone on the basis of cement of general construction purpose of the ПЦI-500-Н brand is received. From the obtained pareto-graphs, hypersurfaces and contour curves, the nature and degree of influence of each of the polynomial members on the objective function – the strength of cement stone G (X₁, X₂, X₃) are determined. The factors of model X₁, X₃ have the greatest statistical significance, the factor X₂ is statically the least significant. The simulation results confirm that the water-mixture ratio does not have a significant effect on the strength of cement stone in a given range of formulations. The maximum strength of cement stone G = 13,582 MPa takes place at the optimum point with coordinates: Х₁ = 0,689; Х₂ = −0,295; Х₃ = 1,105.
Databáze: Directory of Open Access Journals