| Autor: |
Pan Ding, Xiao-juan Liu, Jin-jun Liu, Jing-bo Li, Hui-qin Li, Han-yu Zhao, Jun-yu Duan, You-zhou Jiao |
| Jazyk: |
angličtina |
| Rok vydání: |
2018 |
| Předmět: |
|
| Zdroj: |
Arabian Journal of Chemistry, Vol 11, Iss 6, Pp 935-941 (2018) |
| Druh dokumentu: |
article |
| ISSN: |
1878-5352 |
| DOI: |
10.1016/j.arabjc.2018.02.006 |
| Popis: |
FeCrNi/CBN cored wire is prepared by use of the pull-type flux cored wire machine (FCWM50 type), FeCrNi/CBN composite coating is made by high velocity arc spraying. The special properties of the composite coating can be improved by adding Cr, Ni and small amounts of rare earth elements to adjust the coating composition. The Tribological properties of FeCrNi/CBN composite coating with high velocity arc spraying is studied. Images and components and cross-section microstructure of coatings are analyzed by means of SEM, and EDS, etc. This research indicated that FeCrNi/CBN composite coatings have typical layered structure feature and high bond strength and hardness. Friction of coatings at near room temperature or higher has “Run-up” period. With the increase of temperature, friction coefficient of coatings becomes low and wearing capacity of coatings high. The adding of CBN powder highly improved the wearing capacity of coatings. Keywords: FeCrNi/CBN, Tribological properties, Structure feature, Wearing capacity |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
