| Autor: |
Grzegorz WOJNAR, Bogusław ŁAZARZ, Henryk MADEJ |
| Jazyk: |
angličtina |
| Rok vydání: |
2008 |
| Předmět: |
|
| Zdroj: |
Transport Problems, Vol 3, Iss 1, Pp 25-34 (2008) |
| Druh dokumentu: |
article |
| ISSN: |
1896-0596 |
| Popis: |
This paper presents results of laboratory tests that were aimed at detecting early stages of various faults in toothed wheels by measurement and analysis of transverse vibration speed of the transmission gear shafts. In experimental investigation, cracking of the root tooth and chipping of the tooth were detected. The laser vibrometer Ometron VH300+ was used for non-contact measurement of shaft transversal vibration speed. Gear vibrations were recorded in selected points of gear housing and gear shafts at different speeds and gear loads. Results were analyzed and compared but in this paper is presented only selected examples. This paper shows that on the basis of the transverse vibration speed of transmission gear shafts, it is possible to detect defects at an earlier stage than on the basis of the housing vibration accelerations. In the case of measuring gear shaft vibration velocity, the way of the signal generated by the defect of a gear wheel (or bearing) is shortened as well as the influence of composed transmittance of the bearing-gear housing system is eliminated. WV time-frequency analysis and complex continuous wavelet transformations were used for detection. The authors introduced a measure of local tooth damage, which was proportional to the size of damage. The results of research presented in this paperconfirmed that the defect's measure is very sensitive to the development of teeth faults. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
