Key parameters of gob-side entry retaining by roof cutting in close-distance seam group

Autor: Chaowen Hu, Xiaojie Yang, Qian Li, Bing Hu, Yongyuan Li, Qi Jiang, Fulong Sun
Jazyk: angličtina
Rok vydání: 2024
Předmět:
Zdroj: Geomechanics and Geophysics for Geo-Energy and Geo-Resources, Vol 10, Iss 1, Pp 1-16 (2024)
Druh dokumentu: article
ISSN: 2363-8419
2363-8427
DOI: 10.1007/s40948-024-00772-y
Popis: Abstract During the process of close-distance seam group mining, the coal pillar in the upper coal seam is a stress-concentrated area, which leads to a loss of stability of the roadway during mining of the lower coal seam. This lack of stability introduces great safety hazards to coal mines. To solve the problem of stress concentration of coal pillars, the method of gob-side entry retaining by roof cutting is proposed to remove the coal pillar. In this study, FLAC3D was used to analyze the depth and angle of pre-split blasting. LS-DYNA was used to analyze the spacing of the blasthole. Using the methods of theoretical analysis and numerical simulation, we determined that the optimal depth of the pre-split blasting was 6 m, the optimal angle for pre-split blasting was 15°, and the optimal spacing of the blasthole was 500 mm. A field test was carried out in the 1010201 ventilation roadway of the Yuwang Coal Mine, China. The on-site peeping results showed that when the spacing of the blasthole is 500 mm, connecting cracks can form under the action of blasting stress. After the working surface is mined, the roof strata could collapse and fill the gob over time when the depth and angle of the pre-split blasting are 6 m and 15°, respectively.
Databáze: Directory of Open Access Journals
Externí odkaz: