| Autor: |
El-Sayed G. Khater, Soha A. AbdAlla, Adel H. Bahnasawy, Hassan M. AbuHashish |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Scientific Reports, Vol 14, Iss 1, Pp 1-11 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2045-2322 |
| DOI: |
10.1038/s41598-024-51579-6 |
| Popis: |
Abstract Bio-diesel is used for engine as a replacement of diesel fuel which is characterized by lower emission, low pollution and renewable some of fuel. This study focus on how to enhance the production of bio-oil from Jatropha seeds by using microwave and ultrasonic as pre-treatments. To achieve that, the effects of extraction temperature (60, 80, 100 and 120 °C) and extraction screw speed (60, 90 and 120 rpm) on oil extraction yield and quality, extraction energy requirements and extraction time and were studied. Studying the effect of pretreatments by microwave and ultrasonic on the yield, energy and time of extraction were studied. The results most important indicate that the highest oil yield (25.1%) was recorded at 120 °C extraction temperature and 60 rpm screw speed. The energy required for extraction ranged from 8 to 11.5 W.h depending on temperature and speed of extraction. The results indicated that using both pretreatments improve the oil yield by 5.03% for microwave and by 6.75% for ultrasonic. Finally, the results concluded that to produce 1 kg of biodiesel you need 1.1 kg raw oil and consume from 2052.5 W.h energy requirement. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
