Raw and Pre-Treated Styrene Butadiene Rubber (SBR) Dust as a Partial Replacement for Natural Sand in Mortars

Autor: Krzysztof Pikoń, Nikolina Poranek, Marcin Marczak, Beata Łaźniewska-Piekarczyk, Waldemar Ścierski
Jazyk: angličtina
Rok vydání: 2024
Předmět:
Zdroj: Materials, Vol 17, Iss 2, p 441 (2024)
Druh dokumentu: article
ISSN: 17020441
1996-1944
DOI: 10.3390/ma17020441
Popis: The circular economy (CE) is widely known for its emphasis on reducing waste and maximizing the use of resources by reusing, recycling, and repurposing materials to create a sustainable and efficient system. The CE is based on 3R—reuse, reduce, and recycle. The aim of this article is to use styrene butadiene rubber dust (SBR) in building material, constituting secondary waste in the production of SBR, which is currently disposed of as landfill. SBR is partly intended to replace the natural raw material sand. The purpose of the final material is to use it for its light weight, insulating properties, or ability to absorb vibrations and sounds. Various shares of SBR dust in mortars were tested. Some of the mortars used SBR thermal pre-treatment at temperatures of 200, 275, and 350 °C. The strength and SEM results are presented. The best pre-treatment for SBR dust is thermal treatment at 275 °C. The maximum usage of rubber dust with thermal treatment is 60% as a sand substitute. The novel finding of this study is the possibility to use more than 30% rubber dust (as a substitute for sand) thanks to pre-treatment, whereby 30% is a common maximum ratio in mortars.
Databáze: Directory of Open Access Journals
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje