| Autor: |
Georgios V. Seretis, Aikaterini K. Polyzou, Dimitrios E. Manolakos, Christopher G. Provatidis |
| Jazyk: |
angličtina |
| Rok vydání: |
2019 |
| Předmět: |
|
| Zdroj: |
Frattura ed Integrità Strutturale, Vol 13, Iss 50, Pp 517-525 (2019) |
| Druh dokumentu: |
article |
| ISSN: |
1971-8993 |
| DOI: |
10.3221/IGF-ESIS.50.43 |
| Popis: |
In this study, a multi-parameter analysis, using Taguchi method for design of experiments, has been conducted to investigate the optimum curing conditions for GNPs/E-glass fabric/epoxy laminated nanocomposites. The independent variables in the L25 Taguchi orthogonal array were heating rate, curing temperature and curing time, addressing five levels each. Tensile and 3-point bending tests were performed for each experiment number (run number) of the Taguchi L25. The analysis shown that the most significant para¬meter for tensile strength is the time and for flexural strength is the tem¬pe¬ra¬ture. Also, it shown that the optimum performance was obtained for tem¬pera-ture values greater than the glass transition temperature Tg. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
