| Autor: |
Takao KOIDE, Tatsuya YUKAWA, Suguru TAKAMI, Akio UEDA, Ichiro MORIWAKI, Atsutaka TAMURA, Junichi HONGU |
| Jazyk: |
angličtina |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol 11, Iss 6, Pp JAMDSM0082-JAMDSM0082 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
1881-3054 |
| DOI: |
10.1299/jamdsm.2017jamdsm0082 |
| Popis: |
The present paper describes the tooth surface temperature and the power transmission efficiency of plastic sinecurve gears in the running condition. The plastic sine-curve and involute gears were manufactured by injection molding. The running tests for sine-curve and involute gears were performed under no-lubrication and grease-lubrication conditions, and the tooth surface temperature and the power transmission efficiency were measured. Test results show that the sine-curve gears for operating condition had lower tooth surface temperatures and higher power transmission efficiencies than involute gears under no-lubrication conditions, but in the grease-lubrication condition the superiority of sine-curve gears was not observed. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
