| Autor: |
Zhiguang Chen, Shuangqian Guo, Chaokui Qin |
| Jazyk: |
angličtina |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
Case Studies in Thermal Engineering, Vol 22, Iss , Pp 100796- (2020) |
| Druh dokumentu: |
article |
| ISSN: |
2214-157X |
| DOI: |
10.1016/j.csite.2020.100796 |
| Popis: |
The exhaust gas temperature of SOFC is as high as 600–1000 °C and contains combustible components that can be reused. In this paper, an experimental system was set up to study the combustion characteristics of SOFC simulated exhaust gas in a porous medium burner, the combustion of SOFC exhaust gas under different equivalence ratio, the effects of hydrogen concentration and water vapor fraction in the anode exhaust gas and the stable combustion limits of the burners had been analyzed. Results showed that: equivalence ratio and adiabatic flame temperature had a significant effect on the combustion, when the adiabatic flame temperature of mixed gas below 440 °C, or the water vapor content in the anode gas was greater than 85%, the flame couldn’t be stably burned; On the condition of the fuel utilization rate of 60% and the equivalence ratio of 0.40, the burner could burn stably with the inlet airflow velocity from 0.16 to 0.24m/s; The combustion stability limit of the exhaust gas burner varied with the utilization ratio of the stack, with increasing of fuel utilization ratio, the equivalence ratio of lifting and flashback limit was changing, and the adiabatic flame temperature of stable combustion limit had been studied. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
