The wear of PVD coated elements in oscillation motion at high temperature
| Autor: | Maksim Antonov, Irina Hussainova, Marek Kalbarczyk, Le Liu, Demófilo Maldonado-Cortés, Remigiusz Michalczewski, Edyta Osuch-Słomka, Sylwia Sowa, Zbigniew Słomka, Maciej Łuszcz |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Proceedings of the Estonian Academy of Sciences, Vol 70, Iss 4, Pp 500-507 (2021) |
| Druh dokumentu: | article |
| ISSN: | 1736-6046 1736-7530 |
| DOI: | 10.3176/proc.2021.4.18 |
| Popis: | This paper provides an overview on the recent development of coatings and modified surfaces to minimize wear between contact surfaces in high-temperature working environments. The aim of this work was to study the wear of various types of coatings deposited by the PVD (Physical Vapour Deposition) method on TiB2/Ti composites manufactured by Spark Plasma Sintering (SPS). The following coatings were investigated: TiN-TiCrN-AlCrN-AlCrTiN/Si3N4-multilayer, TiN-TiCrN-AlCrN-AlCrTiN/Si3N4-AlCrTiSiN+grad ON, TiN-TiCrN-AlCrN-AlTiCrN and as a reference, a commercially available AlCrN-based coating â all intended to fulfil complex requirements of high-temperature working conditions. The wear tests were performed by means of a ball-on-disc SRV friction and wear tester using reciprocating motion of the Si3N4 ball sliding against a coated disc in a wide range of temperatures from room temperature up to 900 °C. The results confirmed that high-temperature wear resistance depends on the proper design of the coatings. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|