MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ANNEALED WC/C COATINGS DEPOSITED WITH DIFFERENT GAS MIXTURES IN AN RFMS PROCESS
| Autor: | Peter Hornak, Daniel Kottfer, Kaczmarek Lukasz, Kyziol Karol, Vavro Jan, Klich Marek, Trebuna Jozef, Vrabel Marek, Frankova Maria |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2019 |
| Předmět: | |
| Zdroj: | Ceramics-Silikáty, Vol 63, Iss 2, Pp 213-222 (2019) |
| Druh dokumentu: | article |
| ISSN: | 0862-5468 1804-5847 |
| DOI: | 10.13168/cs.2019.0013 |
| Popis: | The optimised indented hardness (HIT) of WC/C coatings deposited using an RF magnetron sputtering technique in relation to the vacuum chamber pressure and bias is presented in this paper. Based on the investigation, the maximal values of hardness (ca. 22.3 GPa) and Young's modulus (ca. 298 GPa) are shown. Besides the hardness and Young's modulus values, the minimal value of the coefficient of friction (COF) ca. 0.29 was obtained. WC/C coatings were deposited with and without N₂ and N₂+SiH₄ (in a gas mixture) and they were subsequently annealed at 200 °C, 500 °C and 800 °C. Finally, they were evaluated from the aspect of HIT, EIT, COF and morphology as well as from the structural composition of the WC/C coatings before and after annealing. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|