| Autor: |
Zeng Qiang, Li Jianli, Yu Yue, Zhu Hangyu |
| Jazyk: |
angličtina |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
High Temperature Materials and Processes, Vol 39, Iss 1, Pp 74-80 (2020) |
| Druh dokumentu: |
article |
| ISSN: |
2191-0324 |
| DOI: |
10.1515/htmp-2020-0023 |
| Popis: |
In order to improve the recycling efficiency of stainless-steel slag resources, the effect of different cooling rates on the crystallization behavior of CaO-SiO2-MgO-Cr2O3 based system was studied by using FactSage 7.1, XRD, SEM and IPP 6.0. The results indicated that the spinel is a high-temperature precipitated phase and the cooling rate had less effect on the final grain size of spinel crystals, but had greater influences on the nucleation of spinel crystals and the crystallization of silicates such as α-C2S.When the cooling rate was 12∘C/min, the spinel crystals was the unique precipitation. However, the spinel crystals and α-C2S could produce during the slag cooling process as the cooling rate was1∘C/min. Chromium in silicate phase is inclinable to leaching with the dissolution of silicate phase, so the formation of silicate phase should be controlled. According to the influence of the cooling rate on the formation of spinel crystals and the erosion of spinel crystals by α-C2S, it is suggested that the cooling rate of the stainless-steel slag in industrial treatment should not be lower than 12∘C/min. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
