| Autor: |
Mohammad Sadegh Ebrahimi, Mohammad Noruzi, Ramin Hamzehei, Ehsan Etemadi, Ramin Hashemi |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Materials & Design, Vol 235, Iss , Pp 112393- (2023) |
| Druh dokumentu: |
article |
| ISSN: |
0264-1275 |
| DOI: |
10.1016/j.matdes.2023.112393 |
| Popis: |
Due to the significant mortality rate associated with atherosclerosis-induced cardiovascular disease, the utilization of advanced intravascular stents with superior mechanical performance is imperative for the restoration of obstructed arteries. This study proposes novel auxetic medical stents that aim to enhance critical parameters of biomedical stents. This includes load-bearing capacity, expanded opening percentage, and reduced recoil percentage. On this matter, the missing rib auxetic unit cell has been considered and geometrically modified to achieve these objectives. Two-dimensional (2D) metamaterials were fabricated through additive manufacturing technique and subjected to experimental testing. Then, finite element analysis (FEA) was employed to gain comprehensive insights into the mechanical behaviour of the proposed medical stents. Remarkably, an excellent correlation was observed between the FEA and experimental results, validating the high precision of the analysis. The findings reveal that the stents classified as “E-category” exhibit the highest final opening percentage while concurrently demonstrating the lowest recoil percentage. The base stent exhibited a relatively high recoil percentage of 15.56%, indicating a significant amount of recoil or spring-back after deformation. In contrast, the modified “E-category” stent displayed a substantially lower recoil percentage of 1.62%. This notable reduction in recoil percentage indicates that the modifications made to the rib-unit cells had a significant and beneficial effect on the stent's recoil behaviour and minimizing potential damage to arterial tissue during stent deployment (angioplasty) and balloon pressure. The modified design likely enhances the stent's ability to maintain its shape and resist recoil, making it more effective and reliable in its intended application. Additionally, more aspects of biomedical stents such as foreshortening, and dog-boning of the modified missing rib stents were meticulously examined through FEA. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
Full Text from ScienceDirect