| Autor: |
Michael Storchak, Thomas Stehle, Hans-Christian Möhring |
| Jazyk: |
angličtina |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Journal of Manufacturing and Materials Processing, Vol 7, Iss 1, p 1 (2022) |
| Druh dokumentu: |
article |
| ISSN: |
2504-4494 |
| DOI: |
10.3390/jmmp7010001 |
| Popis: |
The simulation of material machining using finite element models is a powerful tool for the optimization of simulated processes and tools, as well as for the determination of cutting process characteristics that are difficult or practically impossible to determine by experiment. The paper presents results of the numerical simulation of the titanium alloy Ti10V2Fe3Al (Ti-1023). The behavior of the machined material was modeled with the Johnson–Cook constitutive equation, and its damage mechanism was modeled using the Cockcroft and Latham model. The parameters of the constitutive equation for machined material behavior and damage were determined using a DOE sensitivity analysis during orthogonal cutting. The values of the cutting force components, as well as the minimum and maximum chip thicknesses, were used as target functions for the DOE analysis. The generalized values of the constitutive equation parameters and the fracture stress values determined by the DOE analysis were calculated as the set intersection of individual multitude values of these parameters. The simulation results of the studied cutting processes showed an acceptable agreement with the experimental data when the cutting speed and tool feed changed significantly. The deviation in the simulated values of the cutting forces from their measured values ranged from about 10% to about 20%. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
