Effect of Surface Roughness and Shot Peening Treatments on The Mechanical Properties of Aluminum Alloy 2024 – T4
| Autor: | Alalkawi H. J. M, Ameer Tofan Shafiq, Mohammed khalouk al-azzawi |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2014 |
| Předmět: | |
| Zdroj: | Engineering and Technology Journal, Vol 32, Iss 10, Pp 2386-2393 (2014) |
| Druh dokumentu: | article |
| ISSN: | 1681-6900 2412-0758 |
| DOI: | 10.30684/etj.32.10A.6 |
| Popis: | The objective of the present paper is to investigate the effect of surface roughness on mechanical properties of aluminum alloy 2024-T4. This paper describes the effect of surface roughness at values of ( 0.1 , 3.5 , 8 ) μm on hardness and yield strength and also estimate the effect of shot peening on the yield strength at period time of ( 5 , 10 , 15 , 20 , 25 ) min. The obtained results show that the low roughness improved the mechanical properties by 15.7% and also the low roughness is better than the shot peening treatments by 5.3% because the low roughness make surface more coherent. Empirical equations are formulated based on the experimental results to evaluate the yield strength with the surface roughness and the hardness.Sy= 394.3 ( Ra + 1.35 ) -0.1356 Sy = 1 / 2.2227(10)-2 - 1.32(10)-4 HV |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|