| Autor: |
Castro G, Rosso L, Allegretti O, Cuccui I, Cremonini C, Negro F, Zanuttini R |
| Jazyk: |
angličtina |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
iForest - Biogeosciences and Forestry, Vol 10, Iss 1, Pp 161-163 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
1971-7458 |
| DOI: |
10.3832/ifor1955-009 |
| Popis: |
The present paper investigates the influence of thermo-vacuum treatment at 170, 190 and 210 °C on the mechanical and physical properties of poplar wood rotary-cut veneers obtained from two different poplar clones (’I-214’ and ’Lena’). The modulus of rupture in bending was determined according to a method derived from European Standard EN-310 and previously validated by the authors, while the density was determined on the basis of EN-323. With both clones no significant decrease was recorded either in bending strength or in density with treatment temperatures up to 190 °C. On the contrary, at 210 °C a highly significant decrease in modulus of rupture (’I-214’: -18%; ’Lena’: -15%) was recorded; the density showed a similar, though lower, trend (’I-214’: -5 %; ’Lena’: -8.5 %). |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
