| Autor: |
R. Mandal, S. Roy, S. Sarkar, T. Mandal, A.K. Pramanick, G. Majumdar |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Archives of Foundry Engineering, Vol vol. 23, Iss No 3, Pp 59-66 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2299-2944 |
| DOI: |
10.24425/afe.2023.146663 |
| Popis: |
Dokra casting is famous for its Artistic value to the world but it is also sophisticated engineering. The technique is almost 4500 years old. It is practiced by the tribal artisans of India. It is a clay moulded wax-based thin-walled investment casting technique where liquid metal was poured into the red hot mould. Dimensional accuracy is always preferable for consumers of any product. Distortion is one of the barriers to achieving the accurate dimension for this type of casting especially for the bending parts. The cause and nature of the distortion for this type of casting must be analyzed to design a product with nominal tolerance and dimensional accuracy. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
