Autor: |
T.S. Baizhumanova, Z.T. Zheksenbaeva, S.A. Tungatarova, R.O. Sarsenova, M.A. Sadenova, S.A. Abdulina |
Jazyk: |
angličtina |
Rok vydání: |
2016 |
Předmět: |
|
Zdroj: |
Chemical Engineering Transactions, Vol 52 (2016) |
Druh dokumentu: |
article |
ISSN: |
2283-9216 |
DOI: |
10.3303/CET1652120 |
Popis: |
Results of the development of multicomponent oxide catalysts based on Ni, Cu, and Cr supported on 2 % Ce/?-Al2O3 by varying the concentration of the active phase of catalyst are presented in paper. It was found that the highest degree of toluene conversion (up to 98.8 %) is observed on the three- component Ni-Cu-Cr/2% Ce/?-Al2O3 catalyst with optimal metal ratio Ni : Cu : Cr = 1.0 : 3.0 : 0.1 at GHSV = 5×103 h-1 and a temperature of 723 - 773 K. The presence of CeO2 crystals, X-ray amorphous clusters (d = 20 – 100 Å) of variable valence metal oxides NiO and CuO as well as solid metal solutions CuO (NiO) was detected on the surface of optimum catalyst calcined at 873 K using XRD and electron microscopy methods. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|