PPK PROCESSING TO BOOST UAS ACCURACY IN CADASTRAL MAPPING
| Autor: | V. E. Oniga, L. Morelli, M. Macovei, C. Chirila, A. I. Breaban, F. Remondino, P. Sestraș |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol XLVIII-1-W1-2023, Pp 345-352 (2023) |
| Druh dokumentu: | article |
| ISSN: | 1682-1750 2194-9034 |
| DOI: | 10.5194/isprs-archives-XLVIII-1-W1-2023-345-2023 |
| Popis: | Unmanned Aerial Systems (UAS) are increasingly used in different applications, including 3D urban modelling, cadastral mapping, urban planning, GIS information system and other fields because of their advantages. As a consequence, UAS equipment is constantly developed to provide more accurate results in a more reliable mode. This paper aims to evaluate the performances of a low-cost UAS system, namely DJI Phantom 4 Pro v2 equipped with a TeoKIT GNSS PPK (post-processing kinematic) module for cadastral mapping purposes. Two fights (oblique and nadir) over a residential area at 60 m height were performed and some 100 ground points were used to derive RMSE accuracies. Comparison between GNSS-aided with PPK processing and indirect georeferencing processes are performed. Given a mobile laser scanner (MLS) point cloud as ground truth, comparison with UAS point clouds and manually digitized features are also performed and reported. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|