Effect of sintering temperature on mechanical properties and ion release of fluorohydroxyapatite (FHA)-filled dental resin composites

Autor: Maryam Hezarjaribi, Majid Akbari, Seyyedeh Fatemeh Namdar, Arash Esmaeili, Zeinab Foroughi, Fatemeh Mollaei, Ebrahim Farah, Arsalan Shahri, Hossein Bagheri
Jazyk: angličtina
Rok vydání: 2023
Předmět:
Zdroj: Journal of Dental Materials and Techniques, Vol 12, Iss 2, Pp 82-90 (2023)
Druh dokumentu: article
ISSN: 2322-4150
2252-0317
DOI: 10.22038/jdmt.2023.62327.1498
Popis: Objective: Smart ion-releasing restorative materials may increase the success and survival rate of composite dental restorations. This study aimed to evaluate the impact of sintering temperature on the mechanical properties and ion-releasing behavior of fluorohydroxyapatite (FHA)-filled dental resin composites.Methods: The FHA was synthesized via a sol-gel method and sintered at three temperatures (250, 500, and 1000ºC). FHA fillers were characterized using X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy, then coated with citric acid and incorporated (40% w/w) into a photo-curable resin matrix (Bis-GMA, TEGDMA, HEMA; weight ratio 2:1:1). Flexural strength (FS) and diametral tensile strength (DTS) were measured, as well as the depth of cure, which was determined by the Vickers microhardness test. The release of calcium and fluoride ions was monitored for a month in diluted citric acid (pH=4.3), and the effect of acidic storage on mechanical properties was evaluated via DTS testing. The filler distribution was observed via scanning electron microscopy. The influence of sintering temperature on the measured variables was statistically analyzed using one-way and two-way ANOVA (α=0.05).Results: The XRD results revealed increased crystallinity with higher sintering temperatures. Correspondingly, mechanical properties improved with increasing sintering temperature (P
Databáze: Directory of Open Access Journals
Externí odkaz: