Data regarding the influence of Al, Ti, and C additions to as-cast Al0.6CoCrFeNi compositionally complex alloys on microstructures and mechanical properties

Autor: Alex Asabre, Janine Pfetzing-Micklich, Oleg Stryzhyboroda, Aleksander Kostka, Ulrike Hecht, Guillaume Laplanche
Jazyk: angličtina
Rok vydání: 2019
Předmět:
Zdroj: Data in Brief, Vol 27, Iss , Pp - (2019)
Druh dokumentu: article
ISSN: 2352-3409
DOI: 10.1016/j.dib.2019.104742
Popis: This brief paper contains raw data of X-ray diffraction (XRD) measurements, microstructural characterization, chemical compositions, and mechanical properties describing the influence of Al, Ti, and C on as-cast Al0.6CoCrFeNi compositionally complex alloys (CCAs). The presented data are related to the research article in reference [1] and therefore this article can be referred to as for the interpretation of the data. X-ray diffraction data presented in this paper are measurements of 2θ versus intensities for each studied alloy. A Table lists the obtained lattice parameters of each identified phase determined by Rietveld analysis. Microstructural-characterization data reported here include backscattered electron (BSE) micrographs taken at different magnifications in a scanning electron microscope (SEM) of Widmanstätten and dendritic microstructures and microstructural parameters such as phase volume fractions, thickness of face-centered cubic (FCC) plates, and prior grain sizes. The compositions of the identified individual phases determined by energy-dispersive X-ray spectroscopy (EDX) in the transmission electron microscope (TEM) are listed as well. Finally, mechanical data including engineering stress-strain curves obtained at different temperatures (room temperature, 400 °C, and 700 °C) for all CCAs are reported. Keywords: High-entropy alloys, HEA, CCA, X-ray diffraction, Tensile properties, Widmanstätten microstructures, Microstructural refinement
Databáze: Directory of Open Access Journals