Influence of Tool Inclination and Effective Cutting Speed on Roughness Parameters of Machined Shaped Surfaces
| Autor: | Ján Varga, Michal Demko, Ľuboš Kaščák, Peter Ižol, Marek Vrabeľ, Jozef Brindza |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2024 |
| Předmět: | |
| Zdroj: | Machines, Vol 12, Iss 5, p 318 (2024) |
| Druh dokumentu: | article |
| ISSN: | 12050318 2075-1702 |
| DOI: | 10.3390/machines12050318 |
| Popis: | Free-form surfaces in the automotive or aviation industry where the future shape of the product will contain complex surfaces raises the question of how to achieve the necessary shape of the required quality in the milling process. One of the methods of their production is the use of 5-axis milling, in which it is necessary to consider not only the input data of the process itself, but also the methodology for evaluating the desired results. Correctly answered questions can thus facilitate the choice of the inclination of the tool when machining parts of the surfaces defined in the experiment. The primary goal of the paper was to monitor the influence of tool inclination on the quality of the machined surface and effective cutting speed by evaluating surface roughness and surface topography. The experiment was designed to show the effect of different tool positions while the feed per tooth fz for the finishing operation remained constant. The best result in terms of surface quality was achieved with a tool inclination of 15° in the cutting process. The most unfavorable result was obtained with a tool axis inclination of zero degrees due to unfavorable cutting conditions. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|