| Autor: |
Xingke Zhao, Tao Chen, Shufan Wang |
| Jazyk: |
angličtina |
| Rok vydání: |
2018 |
| Předmět: |
|
| Zdroj: |
International Journal of Lightweight Materials and Manufacture, Vol 1, Iss 4, Pp 215-218 (2018) |
| Druh dokumentu: |
article |
| ISSN: |
2588-8404 |
| DOI: |
10.1016/j.ijlmm.2018.09.003 |
| Popis: |
For purpose of developing damping materials with increased damping capacity over a wide band, NiTi–PU composites were fabricated by vacuum molding polyether polyurethane melt with NiTi alloy chips additive. The composites were tested using three-point bending at various testing temperatures. Appreciable improvements were observed in bending modulus and load-deflection hysteresis loops of PU matrix. The bending modulus and hysteresis loop area of a composite with 70% NiTi volume content reach a maximum, which are 5.4 times and 5.6 times higher than those of PU matrix, respectively. The mechanism of bending modulus enhancement of NiTi additive was discussed. Keywords: Nitinol, Polyurethane, Composites, Bending modulus, Hysteresis loop |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
