Relation Between Adhesion Properties and Microscopic Characterization of Polyphosphoric Acid Composite SBS Modified Asphalt Binder

Autor: Liangying Li, Zhiwei Li, Yongning Wang, Xiaolan Li, Bo Li
Jazyk: angličtina
Rok vydání: 2021
Předmět:
Zdroj: Frontiers in Materials, Vol 8 (2021)
Druh dokumentu: article
ISSN: 2296-8016
71972951
DOI: 10.3389/fmats.2021.633439
Popis: The purpose of this study was to investigate the adhesive properties of polyphosphoric acid compounded SBS (PPA/SBS) modified asphalt. Three base asphalt binders, one SBS, one dibutyl phthalate (DBP), one furfural extraction oil, and two polyphosphoric acids (PPA), were used to produce the modified binders. The adhesive properties tested in this study included contact angle, cohesive work, adhesive work, and peak area ratio. Cohesive work and adhesive work indicators were calculated from the contact angle, the contact angle between PPA/SBS modified asphalt and three liquids (distilled water, glycerin, formamide) were tested by the contact angle tester, and the peak area ratio of the microscopic adhesion performance index by AFM. The relation between the microscopic adhesion performance characterization method (peak area ratio) and the macroscopic adhesion performance index (cohesive work, adhesion work) was established. The test results indicated that the PPA/SBS modified asphalt had the highest cohesive work and adhesion work under the conditions of 0.5% PPA, 1% DBP, 1.5% extracted oil, and 3.5% SBS, which was clearly greater than the original SBS modified asphalt, while the peak area ratio was consistent with the cohesive work and adhesive work, in which the correlation coefficient between the peak area ratio and cohesive work was 0.77788, and that between the peak area ratio and adhesion work was 0.87203. We recommend adopting the peak area ratio to characterize PPA/SBS modified asphalt’s microscopic adhesion properties.
Databáze: Directory of Open Access Journals
Externí odkaz: