| Autor: |
David E. Cunningham, PhD, Ahmed A. Habis, MD, MSc, FRCSC, Fares Z.N. Uddin, MD, MRCSI, SB-ORTH, James A. Johnson, PhD, George S. Athwal, MD, FRCSC |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
JSES International, Vol 8, Iss 4, Pp 880-887 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2666-6383 |
| DOI: |
10.1016/j.jseint.2024.04.001 |
| Popis: |
Background: Stemless humeral components are being clinically investigated for reverse shoulder arthroplasty (RSA) procedures. There is, however, a paucity of basic science literature on the surgical parameters that influence the success of these procedures. Therefore, this cadaveric biomechanical study evaluated the neck shaft angle (NSA) of implantation on the survivability and performance of stemless RSA humeral components during cyclical loading. Methods: Twelve paired cadaveric humeri were implanted with stemless RSA humeral components at NSAs of 135° and 145°. Implant–bone motion at the periphery of the implant was measured with 3 optical machine vision USB3 cameras outfitted with c-mount premium lenses and quantified with ProAnalyst software. A custom 3-dimensional loading apparatus was used to cyclically apply 3 loading directions representative of physiological states at 5 progressively increasing loading magnitudes. Stemless 135° and 145° implants were compared based on the maximum implant–bone relative distraction detected, as well as the survivorship of the implants throughout the loading protocol. Results: Primary fixation and implant biomechanical survivorship were substantially better in the 145° NSA implants. The 135° NSA implants elicited significantly higher implant–bone distractions during cyclical loading (P = .001), and implant survivorship was considerably lower in the 135° NSA specimens when compared to the 145° NSA specimens (135° NSA: 0%, 145° NSA: 50%) (P |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
