Heat transfer performance of Al2O3-water-methanol nanofluid in a plate heat exchanger
| Autor: | Manikandan Srinivasan Periasamy, Chinnusamy Pradeep Kumar, Thangamani Raghul, Palaniraj Suriya, Ravichandran Pranesh, Karuppasamy Surya, Sanmugam Yokeshwaran |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2024 |
| Předmět: | |
| Zdroj: | Chemical Industry and Chemical Engineering Quarterly, Vol 30, Iss 3, Pp 257-264 (2024) |
| Druh dokumentu: | article |
| ISSN: | 1451-9372 2217-7434 |
| DOI: | 10.2298/CICEQ230726028M |
| Popis: | A plate heat exchanger is one of the smallest and most efficient heat exchangers on the market. This experiment aims to assess the performance of methanol-water as a base fluid in a plate heat exchanger that affects the heat transfer performance. For this study, aluminum oxide (Al2O3) nanoparticle was used in various ratios (0.25, 0.5, and 0.75 vol. %) in a base fluid (10 vol.% methanol & 90 vol.% water) to prepare a nanofluid. At two different temperatures, such as 55°C and 60°C, with varying flow rates (2 to 8 L/min) and varying nanoparticle concentrations (0.25 to 0.75%), thermo physical characteristics and convective heat transfer studies were performed, and the results are presented. The overall inference was that there was a notable enhancement in the hot side, cold side, and overall heat transfer coefficient by the combination of Al2O3 nanoparticle and methanol-water-based fluid. It was noted that utilizing Al2O3/methanol-water nanofluid could significantly reduce the temperature gradient in the heat exchanger and improve its performance. Maximum hot fluid coefficient of 4300 W/m2°C, cold fluid coefficient of 4600 W/m2°C, and overall coefficient of 2200 W/m2°C were noted for 0.75 vol.% nanoparticle concentration and at a flow rate of 8 L/min. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|