An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis

Autor: M. S. H. Bhuiyan, I. A. Choudhury, M. Dahari, Y. Nukman, S. Z. Dawal
Jazyk: angličtina
Rok vydání: 2017
Předmět:
Zdroj: Applied Bionics and Biomechanics, Vol 2017 (2017)
Druh dokumentu: article
ISSN: 1176-2322
1754-2103
DOI: 10.1155/2017/7595642
Popis: A gear-based knee joint is designed to improve the performance of mechanical-type above-knee prostheses. The gear set with the help of some bracing, and bracket arrangement, is used to enable the prosthesis to follow the residual limb movement. The motion analysis and finite-element analysis (FEA) of knee joint components are carried out to assess the feasibility of the design. The maximum stress of 29.74 MPa and maximum strain of 2.393e−004 are obtained in the gear, whereas the maximum displacement of 7.975 mm occurred in the stopper of the knee arrangement. The factor of safety of 3.5 obtained from the FE analysis indicated no possibility of design failure. The results obtained from the FE analysis are then compared with the real data obtained from the literature for a similar subject. The pattern of motion analysis results has shown a great resemblance with the gait cycle of a healthy biological limb.
Databáze: Directory of Open Access Journals
Externí odkaz: