| Autor: |
Kovalenko Iaroslav, Verron Sylvain, Garan Maryna, Šafka Jiří, Moučka Michal |
| Jazyk: |
angličtina |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
Open Engineering, Vol 7, Iss 1, Pp 100-105 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
2391-5439 |
| DOI: |
10.1515/eng-2017-0016 |
| Popis: |
This article describes a method of in-situ process monitoring in the digital light processing (DLP) 3D printer. It is based on the continuous measurement of the adhesion force between printing surface and bottom of a liquid resin bath. This method is suitable only for the bottom-up DPL printers. Control system compares the force at the moment of unsticking of printed layer from the bottom of the tank, when it has the largest value in printing cycle, with theoretical value. Implementation of suggested algorithm can make detection of faults during the printing process possible. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
