| Popis: |
This study explores the adsorption of methylene blue (MB) dye from aqueous solution using different forms of fenugreek galactomannan and linseed (both individually and in combination) as an adsorbent. Characterization study of adsorbents reveal the involvement of carboxyl, hydroxyl and amine groups in MB adsorption taking place on the amorphous and porous surface of the adsorbent. BET surface area of the adsorbent (F+L) was found to be 394 m2/g. Different parameters including pH, adsorbent dose, adsorbate concentration, adsorption time and temperature were studied. Results of the study shows 86.62, 86.94, 88.04, 88.24, 88.56 and 89.09% of MB dye adsorption with F, L, F + L (1:1), F + L (1:2), F + L (2:1) and F + L (2:2) under optimized conditions. Maximum adsorption take place at pH 12, i.e., highly basic medium. Isothermal study shows the fitness of the experimental data to Langmuir isotherm model. Kinetic modeling shows that both physical and chemical interactions are involved in dye adsorption. Further, thermodynamic study confirms the spontaneity, endothermicity and feasibility of the process. Overall, current research involves the use of low-cost raw material for MB dye removal that aids in waste management and in promoting sustainability. HIGHLIGHTS Wastewater treatment is one of the emerging trends in modern society.; Use of saccharide materials without any surface modification for MB dye removal promoting waste management and resource preservation.; Optimization of various operation parameters for a better understanding of the process.; Isothermal, kinetic, and thermodynamic study for better understanding of the adsorption process.; Comparative analysis of adsorption capacity with other studied adsorbents.; |
