| Autor: |
Borkowski Paweł, Głowacki Dominik, Nowakowska Agnieszka, Pawlicki Jakub, Zwolinski Janisław |
| Jazyk: |
angličtina |
| Rok vydání: |
2016 |
| Předmět: |
|
| Zdroj: |
Archive of Mechanical Engineering, Vol 63, Iss 1, Pp 163-185 (2016) |
| Druh dokumentu: |
article |
| ISSN: |
2300-1895 |
| DOI: |
10.1515/meceng-2016-0009 |
| Popis: |
This paper is concerned with the 1st stage of HP rotor blade assembly steam turbine TK 120. The methodology was focused on the selection of mechanical properties and the way of the rotor disc modeling and estimating the degree of damage caused by creep. Then the dynamic interference between the frequencies of excitation and the natural frequencies was assessed. Static calculations were performed for the cyclic sectors consisting of the disc, disc blades, spacers and shrouding, including loads as temperature, mass forces from the angular velocity and the pressure on the blades. Then, the creep analysis using a Norton’s model and the modal analysis were performed. Static analysis gave information concerning the distributions of displacements, stress and strain components. In the creep analysis, the creep displacements and stress relaxation versus time were determined and the estimated degree of damage caused by creep was evaluated at each part of the rotor disc. In the modal analysis, the natural frequencies and modes of vibrations corresponding to the nodal diameters were found. The results of modal analysis were shown in the SAFE graph. Numerical calculations have shown that the rotor disc was a well-designed structure and did not reveal any dynamic interference. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
