| Popis: |
Terrestrial radio navigation systems are an important data source for increasing the integrity of position, navigation, and timing information and for strengthening the immunity to the spoofing and jamming of satellite-based systems. A possible solution for maritime use is the medium frequency R-Mode. Here, the first real results were presented in the Baltic Sea within the R-Mode Baltic project. For the development of receivers and future signal evolution of R-Mode, there is a great need to provide simulated signals to the receiver hardware. For our laboratory work, we developed different hardware in the loop test systems which enable the simulation of each of the three components and the entire medium frequency R-Mode signal. With this setup, we are able to conduct reproducible tests of the R-Mode receiver’s ranging and positioning performance without the necessity of field tests. Furthermore, the impact of R-Mode signal modifications can be initially analyzed without the need of an implementation in the real-world test bed. Firstly, we describe the usage of arbitrary wave generators that can be used to replay received or simulated signals. Due to their wide distribution in electronic laboratories, there are cost-efficient ways to build up test capabilities. For this work, we tested the Tektronix AFG 3022 and the Rigol DG1032. For further tests, we utilize software-defined radios that are capable of streaming continuous signals. We utilize the ETTUS N210 to directly output the simulated signals. Additionally, we test the LimeSDR with an external down-converter. To generate these signals, we utilize software packages that were created to support the development of the digital signal processing. This approach allows us to test our receiver with a continuous integration from pure software to hardware in the loop test. A comprehensive summary gives an overview of the pros and cons for the different suggested systems. |
