Feasibility of backfilling mines using cement kiln dust, fly ash, and cement blends

Autor: Beltagui H., Sonebi M., Maguire K., Taylor S.
Jazyk: English<br />French
Rok vydání: 2018
Předmět:
Zdroj: MATEC Web of Conferences, Vol 149, p 01072 (2018)
Druh dokumentu: article
ISSN: 2261-236X
DOI: 10.1051/matecconf/201814901072
Popis: Cement kiln dust (CKD) is an industrial by-product of the cement manufacturing process, the composition of which can vary widely. Recent years of using alternative fuels have resulted in higher chloride and alkali contents within CKDs; as such, this limits the applications in which CKDs can be utilised. Using a CKD containing a high free lime content of 29.5%, it is shown that this CKD is capable of activating pulverized fuel ash (PFA) due to its high alkalinity, which can be utilised in low strength un-reinforced applications. One potential application involves the backfill of mines, reducing the need for continuous maintenance of the mine. This study focuses on the compressive strength achieved by various blends of CKD, PFA, and cement. Samples were hand mixed and compacted in 100 mm x 50 mm diameter cylinders, and unconfined compressive strength measurements taken at 28 and 56 days. The hydration products were assessed through the use of x-ray diffraction and thermogravimetric analysis. Aiming to maximise the use of CKD at a water to binder (w/b) ratio of 0.2, it was found that the maximum CKD content possible to achieve the required strength was 90% CKD blended with 10% cement.
Databáze: Directory of Open Access Journals