| Autor: |
Wenhan An, Bo Gao, Jianhua Liu, Ji Ni, Jiying Liu |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Case Studies in Thermal Engineering, Vol 59, Iss , Pp 104516- (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2214-157X |
| DOI: |
10.1016/j.csite.2024.104516 |
| Popis: |
This study proposes a hybrid prediction model using sparrow search algorithm (SSA) to optimize the convolutional neural network (CNN) and support vector machine (SVM), in order to perform accurate prediction of secondary supply temperature (Ts2). The historical operation data of Weifang residential building thermal station was adopted and reasonable data preprocessing was performed to suppress the interference of abnormal data. The input variables of the prediction model were screened using the correlation analysis method, taking the influence of the hysteresis effect into consideration. The SSA–CNN–SVM model was then developed for prediction. The performance of the model was evaluated by the root mean square error, mean absolute error, mean absolute percentage error (MAPE), and absolute value of relative error of each time step. The results obtained demonstrated that the SSA–CNN–SVM model has high prediction accuracy. The MAPE values of the two heat exchange stations were between 2.28 % and 2.4 %. The indoor temperature significantly affected the prediction accuracy of Ts2. After the introduction of the indoor temperature, the MAPE of the predicted values of the hybrid model was reduced by 0.35 %. The maximum reduction in MAPE of the SSA–CNN–SVM model was 1.5 % compared with other prediction models. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
