Technological Parameters of Rotating Electrochemical and Electrobiological Disk Contactors Depending on the Effluent Quality Requirements
Autor: | Joanna Rodziewicz, Artur Mielcarek, Wojciech Janczukowicz, Kamil Bryszewski, Agata Jabłońska-Trypuć, Urszula Wydro |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2022 |
Předmět: |
soilless tomato cultivation wastewater
nutrient removal bioelectrochemical reactor (BER) rotating electrochemical disk contactor (RECDC) rotating electrobiological disk contactor (REBDC) technological parameters Technology Engineering (General). Civil engineering (General) TA1-2040 Biology (General) QH301-705.5 Physics QC1-999 Chemistry QD1-999 |
Zdroj: | Applied Sciences, Vol 12, Iss 11, p 5503 (2022) |
Druh dokumentu: | article |
ISSN: | 2076-3417 |
DOI: | 10.3390/app12115503 |
Popis: | Soilless tomato cultivation wastewater, with typically low COD, high concentrations of phosphorus, and oxidized forms of nitrogen, may be effectively treated in a rotating electrochemical disk contactor (RECDC) and in a bioelectrochemical reactor (BER), such as a rotating electrobiological disk contactor (REBDC). The aim of this study was to determine the technological parameters of both reactors, i.e., electric current density (J) and hydraulic retention time (HRT), depending on the effluent quality requirements. The study was conducted with four one-stage RECDCs and with four one-stage REBDCs, at four hydraulic retention times, i.e., 4, 8, 12, and 24 h, and electric current densities of 0.63, 1.25, 2.50, 5.00, and 10.00 A/m2. It was demonstrated that soilless tomato cultivation wastewater could be effectively treated in electrochemical and electrobiological disk contactors, and then discharged to sewage system facilities. In a RECDC, the highest denitrification (53.4%) and dephosphatation (99.8%) performance was achieved at J = 10.0 A/m2 and HRT = 24 h. If the effluents are to be discharged to natural reservoirs, their effective treatment is only feasible in a REBDC. The bioelectrochemical disk contactor ensured over 90% dephosphatation effectiveness. At HRT = 24 h and all electric current densities studied, the concentrations of pollutants in the effluent met requirements set for industrial wastewater discharged into natural waters and the ground. By applying J = 2.5 A/m2 and HRT = 24 h in the REBDC, it was possible to achieve a phosphorus concentration below 3.0 mg P/L and concentrations of ammonia nitrogen and nitrites lower than the permissible levels for treated industrial wastewater introduced to waters and to the ground. Given the nitrate concentration (exceeding 30 mg N/L), an external carbon source is recommended to aid a treatment process that uses a technological system with a REBDC. Technological schemes were proposed for wastewater treatment plants (WWTPs) with a RECDC and a REBDC, for discharging treated wastewater to natural waters, the ground, and sewage systems. |
Databáze: | Directory of Open Access Journals |
Externí odkaz: |