| Popis: |
Harbour tugs are usually used to moor ships if large ships do not have their own additional propulsion devices (thrusters). Alternatively, during ship loading operations, ships sometimes have to be transferred from one quay to another, and in some cases, port users (shipping companies or other companies) have to pay for port tug services. In such cases, it is very important to guarantee the safety of shipping during mooring operations and to use tugboats optimally and at the same time reduce the cost of tugboat services for ship operators and other companies. For the optimal use of tugboats, it is very important to accurately estimate the required traction force (bollard pull) of tugboats and their quantity, taking into account the parameters of moored ships, the locations of berths, hydro-meteorological and hydrological conditions, and clearance (the gap between the ship’s hull and the bottom of the water area), in order to guarantee the safety of navigation and not to order an excess of tugboats in terms of their quantity and powers. This article presents a methodology developed for estimating the required bollard pull and the number of tugs, taking into account the parameters of the ship, hydro-meteorological and hydrological conditions, clearance, and the locations of berths. The developed methodology for estimating the number of tugboats and their traction force (bollard pull) was tested in real conditions (with real ships and tugboats) and using a calibrated simulator, and we found that it can be successfully applied in any port or other complex shipping area by adapting it to specific conditions. The developed methodology for calculating the traction power (bollard pull) of tugboats allows us to determine the required traction force of tugboats in advance with sufficient accuracy, achieved by assessing the specific parameters and environmental conditions of the vessel served by tugboats. In the most difficult areas of the port, in terms of the use of tugboats, this methodology allows us to make reasonable decisions regarding the number of tugboats and the traction force (bollard pull) required and at the same time reduces the risk of emergency situations. |
