| Autor: |
Krzyżek Robert |
| Jazyk: |
angličtina |
| Rok vydání: |
2015 |
| Předmět: |
|
| Zdroj: |
Reports on Geodesy and Geoinformatics, Vol 97, Iss 1, Pp 47-70 (2015) |
| Druh dokumentu: |
article |
| ISSN: |
2391-8152 |
| DOI: |
10.2478/rgg-2014-0011 |
| Popis: |
As a result of traditional geodetic surveying we usually achieve observations which are then used for calculating rectangular coordinates onto a plane along with precision evaluation. In this article the surveying methods are presented in which the situation is different. Test measurements were carried out, consisting in the measurement of a fragment of detailed control network in RTK (Real Time Kinematic) and RTX (Real Time Extended) mode with xFill function. First, the rectangular coordinates onto a plane (through the transformation of data ellipsoidal) were obtained, on the basis of which the conversion observations were determined and they were compared with each other, as well as with reference parameters - conversion observations out of detailed control network adjustment with use of the method of least squares. The results of the study allow to verify the precision and application possibilities of conversion observations obtained thanks to Trimble RTX technology with xFill function. Application of this surveying method in typical geodetic tasks is fully justifiable. Nevertheless, it is recommendable to be aware of the correlations of absolute or relative values obtained in RTX procedure to reference parameters, which in turn will enable conclusive verification of the possibilities of Trimble RTX technology application in certain geodetic surveys. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
