Finite Element analysis of stress state in the cement of total hip prosthesis with elastomeric stress barrier
| Autor: | Fadela Allaoua, Habib Lebbal, Abderrahmane Belarbi |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Fracture and Structural Integrity, Vol 15, Iss 57, Pp 281-290 (2021) |
| Druh dokumentu: | article |
| ISSN: | 1971-8993 65946413 |
| DOI: | 10.3221/IGF-ESIS.57.20 |
| Popis: | In the total hip prosthesis, according to different positions of the patient, there are a variety of loads acting on femoral head which generate stress concentration in the cement called polymethylmethacrylat (PMMA) and consequently in interfaces stem/cement/bone. This load transfer can provoke loosening of the implant from the femoral bone. This paper focused on optimal stress distribution in the total hip prosthesis and devoted to the development of a redesigned prosthesis type in order to minimize stress concentration in the cement. This study investigated the effect of elastomeric stress barrier incorporated between the stem and femoral head using 3D-finite element analysis. The proposed model provided an acceptable solution for load transfer reduction to the cement. This investigation enabled an increase of the service life of total hip prosthesis avoiding the loosening. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|