Influence of Zinc Oxide Nanoparticles on Flame Resistance in Wood Plastic Composites
| Autor: | Sefa Durmaz, Uğur Aras, Erkan Avcı, Yusuf Ziya Erdil, İlkay Atar, Hülya Kalaycıoğlu |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | Drvna Industrija, Vol 74, Iss 4, Pp 459-468 (2023) |
| Druh dokumentu: | article |
| ISSN: | 0012-6772 1847-1153 |
| DOI: | 10.5552/drvind.2023.0132 |
| Popis: | The interest in wood plastic composites (WPCs) has increased in recent years. The utilization of environmentally friendly materials has been of great significance due to the overwhelming pressure on nature. As a widely used material, plastic is, however, easily combustible due to its structure. In this study, WPCs were reinforced with zinc oxide (ZnO) nanoparticles. The effect of higher content of ZnO nanoparticles (1, 3, 5, 10 %) on WPCs thermal stability and fire performance was investigated. Thermogravimetric analysis (TGA) clearly demonstrated that nanoparticles acted as a shield, which inhibited heat transfer and increased the degradation temperature thanks to covering the surface of materials. Free radicals accelerated the thermal degradation of neat-HDPE (high-density polyethylene) by oxidative reactions, while ZnO nanoparticles reduced the degradation velocity. Moreover, the increase in nanoparticle content significantly affected the residue. The fire performance of WPCs was also investigated by the limit oxygen index (LOI) test. While neat-HDPE flamed with dripping, ZnO nanoparticles made flaming difficult for WPCs. Therefore, the LOI values increased with increasing nanoparticle content up to 28.5 %, which indicated the need for more oxygen. The improvement reached up to 54 % compared to neat HDPE. Moreover, the char forming was also improved, which helped enhance the fire resistance. The scanning electron microscope (SEM) investigation indicated that nanoparticles were well dispersed in the matrix. However, the tendency to agglomerate increased with the increase of concentration. The ability of carbonization of wood fiber surface during the combustion also contributed to improving thermal stability and fire performance. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|