Al/Graphene/CNT hybrid composites: Hardness and sliding wear studies
| Autor: | Naik Manjunath H.R., Manjunath L.H., Koti Vishwanath, Lakshmikanthan Avinash, Koppad Praveennath G., Kumaran Sampath P. |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | FME Transactions, Vol 49, Iss 2, Pp 414-421 (2021) |
| Druh dokumentu: | article |
| ISSN: | 1451-2092 2406-128X |
| DOI: | 10.5937/fme2102414N |
| Popis: | Graphene and carbon nanotubes are two carbon based materials known for their unique wear and friction properties. It would be quite interesting to understand the wear behavior of aluminium hybrid composites when these two nanosize reinforcements are incorporated into it. The hybrid composites with varying weight fractions of graphene (1, 2, 3 and 5 wt.%) and fixed CNT content of 2 wt.% were produced using powder metallurgy technique. The effect of varying graphene content on hardness and sliding wear of hybrid composites was studied. The wear tests were done as per ASTM G-99 standard with fixed sliding velocity (2 m/s) and sliding distance (1200 m) but varying applied load (10 - 30 N). Worn surface analysis was conducted using scanning electron microscope to arrive at wear mechanisms responsible for wear of aluminium and its hybrid composites. Increase in graphene content led to increase in bulk hardness with highest value of 61 RHN for hybrid composite with 3 wt.% graphene content. The wear rate of hybrid composites was found to be decreasing with enhancement in graphene content. Lower wear rate in hybrid composites was due to the formation of lubricating layer on the worn surface. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|