A Review of Friction Performance of Lubricants with Nano Additives

Autor:	Muhammad Waqas, Rehan Zahid, Muhammad Usman Bhutta, Zulfiqar Ahmad Khan, Adil Saeed
Jazyk:	angličtina
Rok vydání:	2021
Předmět:	nanoparticles friction wear tribology biolubricants synthetic oils Technology Electrical engineering. Electronics. Nuclear engineering TK1-9971 Engineering (General). Civil engineering (General) TA1-2040 Microscopy QH201-278.5 Descriptive and experimental mechanics QC120-168.85
Zdroj:	Materials, Vol 14, Iss 21, p 6310 (2021)
Druh dokumentu:	article
ISSN:	14216310 1996-1944
DOI:	10.3390/ma14216310
Popis:	It has been established in literature that the addition of nanoparticles to lubricants at an optimum concentration results in a lower coefficient of friction compared to lubricants with no nanoparticle additives. This review paper shows a comparison of different lubricants based on the COF (coefficient of friction) with nanoadditives. The effect of the addition of nanoparticles on the friction coefficient was analyzed for both synthetic and biolubricants separately. The limitations associated with the use of nanoparticles are explained. The mechanisms responsible for a reduction in friction when nanoparticles are used as an additive are also discussed. Various nanoparticles that have been most widely used in recent years showed good performance within lubricants, including CuO (copper oxide), MoS2 (molybdenum disulfide), and TiO2 (titanium dioxide). The paper also indicates some research gaps that need to be addressed.
Databáze:	Directory of Open Access Journals
Externí odkaz:	https://doaj.org/article/7ad5281f398a47f183636043969eea9d Zobrazit plný text záznamu View record in DOAJ Plný text ve formátu PDF Plný text ve formátu HTML
Nepřihlášeným uživatelům se plný text nezobrazuje	K zobrazení výsledku je třeba se přihlásit.