Residual stress in TI6AL4V objects produced by direct metal laser sintering

Autor:	Van Zyl, Ian, Yadroitsava, Ina, Yadroitsev, Igor
Jazyk:	angličtina
Rok vydání:	2016
Předmět:	direct metal laser sintering residual stress titanium alloy Industrial engineering. Management engineering T55.4-60.8
Zdroj:	South African Journal of Industrial Engineering, Vol 27, Iss 4, Pp 134-141 (2016)
Druh dokumentu:	article
ISSN:	1012-277X 2224-7890
DOI:	10.7166/27-4-1468
Popis:	Direct Metal Laser Sintering produces 3D objects using a layer-by- layer method in which powder is deposited in thin layers. Laser beam scans over the powder fusing powder particles as well as the previous layer. High-concentration of laser energy input leads to high thermal gradients which induce residual stress within the as- built parts. Ti6Al4V (ELI) samples have been manufactured by EOSINT M280 system at prescribed by EOS process-parameters. Residual stresses were measured by XRD method. Microstructure, values and directions of principal stresses inTi6Al4V DMLS samples were analysed.
Databáze:	Directory of Open Access Journals
Externí odkaz:	https://doaj.org/article/783f94694a5e46768c2294e69466cb15 Zobrazit plný text záznamu View record in DOAJ