Comparison of surface characteristics and micro hardness of AISI D2 tool steel and LM13 aluminum alloy machined under dry EDM (green machining) process

Autor:	Pragadish N., Pradeep Kumar M.
Jazyk:	angličtina
Rok vydání:	2021
Předmět:	dry edm conventional edm micro structure micro hardness Engineering (General). Civil engineering (General) TA1-2040 Mechanics of engineering. Applied mechanics TA349-359
Zdroj:	FME Transactions, Vol 49, Iss 2, Pp 488-493 (2021)
Druh dokumentu:	article
ISSN:	1451-2092 2406-128X
DOI:	10.5937/fme2102488P
Popis:	In this experimental work, the micro structure and the micro hardness of the surfaces machined under the dry EDM process is analyzed for AISI D2 tool steel and LM13 aluminum alloy. The experiments were conducted using copper tool electrode. Few modifications were made in the tool for conducting the experiments under dry EDM process. Discharge current, pulse on time, voltage, pressure, tool rotational speed and the duty factor were used as the various process parameters and their influence over the micro structure and micro hardness of the machined surfaces were analyzed. Better results were observed in the dry EDM process for AISI D2 tool steel, whereas dry EDM process did not reveal appreciable results for LM13 aluminum alloy.
Databáze:	Directory of Open Access Journals
Externí odkaz:	https://doaj.org/article/ac77b49be14046ee8f8b3bcdef5b0b36 Zobrazit plný text záznamu View record in DOAJ