Autor: |
Yali Wang, Ruting Xu, Mingzhe Ma, Kang Sun, Jianchun Jiang, Hao Sun, Shicai Liu, Yanren Jin, Ting Zhao |
Jazyk: |
angličtina |
Rok vydání: |
2023 |
Předmět: |
|
Zdroj: |
Materials, Vol 16, Iss 15, p 5236 (2023) |
Druh dokumentu: |
article |
ISSN: |
1996-1944 |
DOI: |
10.3390/ma16155236 |
Popis: |
The effective utilization of charcoal and tar byproducts is a challenge for pyrolysis gasification of bamboo. Herein, the bamboo tar was modified via polymerization and acted as a new adhesive for the preparation of excellent bamboo-charcoal-derived molding activated carbon (MBAC). As compared with pristine tar and other adhesives, the aromatization of tar with phenol increased its molecular weight, oxygenic functional groups, and thermal stability, leading to the decreased blocking impact of charcoal pore and improved bonding and pyrolytic crosslinking effect between charcoal particles. These further contribute to the high mechanical strength, specific surface area, pore volume, and amount of oxygenic functional groups for fabricated MBAC. Owing to the high microporous volume of MBAC, it exhibited 385 mg·g−1 toluene and 75.2% tetrachloride gas adsorption performances. Moreover, the pseudo-first-order, pseudo-second-order, and Bangham models were used to evaluate the kinetic data. The toluene adsorption process conforms to the Bangham kinetic model, suggesting that the diffusion mechanism of toluene adsorption mainly followed intraparticle diffusion. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|