| Autor: |
Iordache Daniela-Monica, Ducu Cătălin-Marian, Niţu Eduard-Laurentiu, Iacomi Doina, Plăiaşu Adriana-Gabriela |
| Jazyk: |
English<br />French |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
MATEC Web of Conferences, Vol 112, p 04005 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
2261-236X |
| DOI: |
10.1051/matecconf/201711204005 |
| Popis: |
Aluminum and copper are two common metals and Al-Cu joints are commonly used in the power industry. Overlay joints of 3105 aluminum alloy and commercially pure copper were produced by FSW, microstructure and mechanical properties was investigated. A combination of optical and scanning electron microscopy is used to characterize the microstructures in the copper and heat affected zone in the aluminum near the fusion line. The hardness distribution was analyzed and residual stresses were measured at the stir zone, copper side and aluminum alloy side. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
