Autor: |
Prabhat Pant, Filomena Salvemini, Sebastian Proper, Vladimir Luzin, Kjell Simonsson, Sören Sjöström, Seyed Hosseini, Ru Lin Peng, Johan Moverare |
Jazyk: |
angličtina |
Rok vydání: |
2022 |
Předmět: |
|
Zdroj: |
Materials & Design, Vol 214, Iss , Pp 110386- (2022) |
Druh dokumentu: |
article |
ISSN: |
0264-1275 |
DOI: |
10.1016/j.matdes.2022.110386 |
Popis: |
Process parameters in laser-based powder bed fusion (LBPF) play a vital role in the part quality. In the current study, the influence of different novel scan strategies on residual stress, porosities, microstructure, and crystallographic texture has been investigated for complex L-shape parts made from nickel-based superalloy Inconel 718 (IN718). Four different novel scanning strategies representing total fill, re-melting, and two different sectional scanning strategies, were investigated using neutron diffraction, neutron imaging, and scanning electron microscopy techniques. These results were compared with the corresponding results for an L-shape sample printed with the conventional strategy used for achieving high density and more uniform crystallographic texture. Among these investigated novel strategies, the re-melting strategy yielded approximately a 25% reduction in surface residual stress in comparison to the reference sample. The other two sectional scanning strategies revealed porosities at the interfaces of the sections and due to these lower levels of residual stress were also observed. Also, variation in crystallographic texture was observed with different scan strategies. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|